Class 10 Physics questions on light often look manageable until a negative sign changes the image distance. The key is to treat each numerical as a small optical model: identify the object, medium, surface and image before touching a formula. That habit turns scattered theory into a repeatable solution.
Students in Australia and Pakistan both use metres and seconds in physics, so SI units transfer smoothly. Keep angles in degrees for school trigonometry, distances in metres when calculating lens power, and centimetres when a mirror formula gives convenient whole numbers. State every sign choice beside the diagram; examiners can then follow the same reasoning even when working differs.
Start with a ray diagram, not a formula. Mark the principal axis, optical centre or pole, object, incident ray, reflected or refracted ray, and the normal where the ray meets the surface. Label the angle of incidence and angle of refraction against the normal, not the surface. These labels prevent the most common optical errors before arithmetic begins.
A familiar example is a sunny day at Bondi Beach in Sydney, where many people wear sunglasses and swimming goggles. Sunglasses mainly reduce selected light through absorption or polarisation; goggles use curved lenses that refract light and can also shift the apparent size of an object. A swimmer looking through a mask sees a distorted or magnified view because refraction at air–water and air–glass boundaries changes ray directions.
Melbourne's rapidly changing light gives another everyday connection. A phone camera switches among several lenses as a commuter moves between bright streets, shaded lanes and a dim train. Each lens has a focal length and image distance, so the same geometrical model used in a classroom problem sits inside a device many students carry every day.
For a spherical mirror under the new Cartesian sign convention, distances measured in the direction of the incident light are positive and those against it are negative. A concave mirror usually has a negative focal length, a convex mirror a positive focal length, and a real object placed in front of the mirror has a negative object distance. Use (1/f = 1/v + 1/u) and (m = -v/u), then interpret magnification rather than trusting the arithmetic alone.
Suppose a concave mirror has (f = -20) cm and an object is at (u = -60) cm. Then (1/v = 1/f - 1/u = -1/20 + 1/60 = -1/30), so (v = -30) cm. The magnification is (m = -(-30)/(-60) = -0.5). A negative magnification means an upright, diminished, virtual image, and the negative image distance places it behind the mirror. Drawing the ray construction confirms the result.
Change one quantity and the answer changes character. An object inside the focal length of a concave mirror produces a magnified virtual image; beyond it, the image is real and inverted. For a convex mirror, the focal length is positive and the image remains virtual, upright and diminished. Mentioning that physical interpretation in the final line often earns clarity in board-style answers.
Refraction occurs when light changes speed as it enters a different optical medium. Snell's law, (n_1\sin i = n_2\sin r), pairs the refractive indices with the angles measured from the normal. Since (n = c/v), the denser medium has the larger index, and the ray bends towards the normal when entering it from a less dense medium.
For light travelling from air into glass, take (n_1 = 1.00), (n_2 = 1.50) and (i = 45^\circ). Then (\sin r = (1.00/1.50)\sin 45^\circ = 0.4714), giving (r \approx 28.1^\circ). The smaller refracted angle shows the bending towards the normal. In a numerical, state the two media first; reversing (n_1) and (n_2) would model light travelling in the opposite direction.
Snell's law also predicts the critical angle when light moves from glass into air. Using (\sin c = n_{\text{air}}/n_{\text{glass}} = 1/1.50) gives (c \approx 41.8^\circ). At greater incidence angles, total internal reflection occurs. This is the operating principle behind optical fibres, which carry information as pulses of light over long distances.
For a thin converging lens, the new Cartesian form is (1/f = 1/v - 1/u), with magnification (m = v/u). If (f = +20) cm and (u = -30) cm, then (1/v = 1/20 - 1/30 = 1/60), so (v = +60) cm and (m = -2). The image is real, inverted and twice the object's size. If focal length is converted to metres, (0.20) m gives a lens power of (+5) D.
Apparent depth follows from the same refractive-index idea. For an observer in air looking normally into water, (d_a = d_r(n_{\text{air}}/n_{\text{water}})). A pool depth of (1.20) m with (n_{\text{water}} = 1.33) therefore appears as (1.20/1.33 \approx 0.90) m. The formula is useful for checking the answer, but it applies directly to the near-normal viewing arrangement used in school questions.
Once geometrical optics is secure, learners can broaden their revision without losing sight of the core skills. For the next stage of the course, these thermal physics revision notes offer worked examples of graph-based questions and temperature-scale conversions.
A sound numerical is easy to audit:
Keep a separate error column beside each solution. Instead of recording only “sign mistake,” write the exact correction, such as “concave focal length is negative for an object on the left.” That specific reminder is much more useful when the same numerical is attempted again under exam pressure.
Everyday products make the laws relevant beyond the classroom. Sunglasses sold through Australian pharmacies, supermarkets and optical retailers operate within product-safety expectations and consumer guarantees under the Australian Consumer Law. The Australian/New Zealand Standard AS/NZS 1067:2003 provides a reference for sunglass categories and testing, so claims about UV protection should be checked rather than inferred from a dark tint.
Road legislation adds a safety consequence. Victorian road rules, for example, require a driver to retain clear vision; sunglasses that obscure the road or traffic signals are not acceptable, even if they are fashionable. Correct prescription lenses and suitable tint can still be used. This is where knowledge of lens behaviour, glare and transmission becomes practical rather than merely numerical.
Exam technique should mirror that practical checking. After completing a paper, record whether the error came from a diagram, sign, formula, calculator use or final interpretation. A reflection journal routine can structure that review: write the wrong step, the corrected principle and one cue for the next attempt. Reworking a question after a day often reveals more than rereading the same solution.
A compact revision session works best when it alternates input with retrieval. Spend 20 minutes deriving mirror, Snell and lens relations from a blank page, then solve one numerical of each type without notes. Check units, signs, diagram labels and image interpretation; only then compare the working. Finish by explaining one answer aloud, since a clear verbal account exposes assumptions that a copied solution can hide.
Use past papers and timed tests to vary the conditions: a concave mirror becomes convex, an object crosses the focal point, or light changes direction between water and glass. Prioritise repeated weak links rather than the number of questions attempted. Keep a small set of fully corrected examples as a reference for method, not as something to copy during the next attempt.
Your next concrete step is to solve one 10-mark mixed-optics numerical on squared paper, mark it against the sign-convention checklist, and note the single correction that would make the solution complete.